Description

Product details

Stainless Steel Barrel Nipple (also commonly referred to as a pipe nipple or a long nipple).⚙️ Design & FunctionalityBoth Ends Male (TBE): It features external male threads machined onto both ends, leaving a smooth unthreaded section (the barrel) in the center.Line Extension: It is primarily used to bridge short gaps between two female-threaded fittings, valves, or pipe adapters inside a fluid transmission line.Rigid Construction: Machined from heavy-walled stainless steel pipe (typically Schedule 40 or Schedule 80), providing high burst pressure protection and resistance to structural sagging.💡 Installation Best PracticesThread Sealant Required: Because these threads are tapered (standard NPT or BSPT), you must apply a high-quality PTFE (Teflon) tape or pipe joint compound to the male ends before assembly to achieve a leak-tight seal.Wrench Placement: When tightening the nipple into a valve, always place your pipe wrench on the smooth center barrel section rather than directly over the threads to prevent flattening or damaging the critical thread profiles.If you are incorporating this nipple into your plumbing layout, let me know:What is the nominal pipe size (e.g., 1“, 1-1/2”, or 2") and the total length you require?What thread standard does your system use (NPT for Americas or BSP for Europe/Asia)?Are you handling highly corrosive process chemicals (requiring SS 316) or standard utility water lines?I can help verify the correct sizing dimensions and pipe schedule for your application!