Grooved pipe fittings typically conform to Victaulic Grooved End Fittings and ANSI/AWWA C606 standards, offering sizes from ¾' to 24' (DN20–DN600) and working pressures up to 500–1000 PSI depending on the grade of ductile iron or stainless steel used. Materials & Standards • Ductile Iron: Conforming to ASTM A536 (Grade 65-45-12). • Stainless Steel: CF8M / ASTM A351 for corrosive environments. • Compliance: ANSI/AWWA C606 for rigid and flexible groove specifications, UL listed, and FM approved for fire protection. Operating Parameters • Size Range: ¾ inch up to 24 inch nominal pipe size. • Working Pressure: Standard ratings range from 300 PSI up to 500 PSI or 1000 PSI for specialized high-pressure systems. • Gasket Seals: EPDM (standard for water/air, -30°F to 230°F) or FKM/Nitrile for specialized chemical or oil applications. Surface Finishes • Red or Orange Enamel Paint (standard for HVAC and fire protection). • Hot-Dipped Galvanized (optional for outdoor or corrosive exposure). If you need specifications for a specific fitting type (such as 90° elbows, tees, or reducers) or a particular pipe size, let me know and I can provide exact dimensions and pressure tolerances. AI responses may include mistakes.