Carbon steel (CS) butt weld fittings are piping components built to ASME B16.9 standards. They range from 1/2' to 48' in size, using material grades like ASTM A234 WPB. They match pipe schedules (Sch 40, Sch 80) to handle high pressures and change fluid flow directions. Material Specifications • Standards: ASTM A234 (WPB, WPC), ASTM A420 (Low temp), ASTM A860 (High strength) • Tensile Strength: Minimum 415 MPa (60, 200 psi) for WPB • Yield Strength: Minimum 240 MPa (34, 800 psi) for WPB Dimensional & Design Standards • General Dimensions: ASME B16.9 (Factory-made wrougth buttweld fittings) • Short Radius Elbows: ASME B16.28 • End Preparation: ASME B16.25 (Beveled ends for welding) • Large Diameter MSS Standards: MSS-SP-75 Sizes and Schedules • Size Range: 1/2 inch nominal pipe size (NB/NPS) up to 48 inches. • Wall Thickness Schedules: Sch 10, Sch 40, Sch 80, Sch 160, STD, XS, XXS. Types of Fittings • Elbows: 45-degree and 90-degree (Long or Short radius) • Tees: Equal and Reducing tees • Reducers: Concentric and Eccentric reducers • Caps & Stub Ends: Pipe end closures and joint supports
This is your website preview.
Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.
Carbon steel (CS) butt weld fittings Stockist And Supplier In Ahmedabad Gujarat India
2026-08-18T18:32:23
Carbon steel (CS) butt weld fittings are piping components built to ASME B16.9 standards. They range from 1/2' to 48' in size, using material grades like ASTM A234 WPB. They match pipe schedules (Sch 40, Sch 80) to handle high pressures and change fluid flow directions. Material Specifications • Standards: ASTM A234 (WPB, WPC), ASTM A420 (Low temp), ASTM A860 (High strength) • Tensile Strength: Minimum 415 MPa (60, 200 psi) for WPB • Yield Strength: Minimum 240 MPa (34, 800 psi) for WPB Dimensional & Design Standards • General Dimensions: ASME B16.9 (Factory-made wrougth buttweld fittings) • Short Radius Elbows: ASME B16.28 • End Preparation: ASME B16.25 (Beveled ends for welding) • Large Diameter MSS Standards: MSS-SP-75 Sizes and Schedules • Size Range: 1/2 inch nominal pipe size (NB/NPS) up to 48 inches. • Wall Thickness Schedules: Sch 10, Sch 40, Sch 80, Sch 160, STD, XS, XXS. Types of Fittings • Elbows: 45-degree and 90-degree (Long or Short radius) • Tees: Equal and Reducing tees • Reducers: Concentric and Eccentric reducers • Caps & Stub Ends: Pipe end closures and joint supports
2026-08-18T18:32:23
 butt weld fittings Sto)
Submit Your Enquiry